To give you an idea of the cost, a Nissan Propane Forklift dating from the latter part of the 1990s would run you roughly $11,000 to $14,000. More than likely, you would be able to find a model like this with fewer than 5,000 operating hours, approximately 15 feet of lifting capacity and cushion tires. On the other hand, a second-hand Nissan forklift truck which has less than 5,000 hours could be found for under $7,000. This alternative may be a little bit of an older model than some others, but bear in mind; everything revolves around the operating hours. A model like this will most likely have a pretty good load capacity of around 5,000 pounds.
A brand new Nissan forklift, dating from 2005 to the current year, could be found for around $10,000. Usually, these units would have a regular lift capacity ranging from 4,000 to 5,000 lbs. Usually, a model similar to this will run smoothly and have cushion tires. Of course, newer units normally work smoother compared to older ones.
Kinds of Forklifts
Generally, forklifts are categorized in 2 specific ways: by the kind of fuel it takes and the structure of the forklift. Based on structure, the following types of lift trucks are amongst the most common:
Standard Forklift: The standard lift truck comprises the regular warehouse equipment we are all familiar with. These forklifts offer a lifting capacity of 3,000 to 5,000 lbs. They have a height capacity of roughly 20 feet.
Reach Forklift: Normally known as a narrow aisle forklift, the reach lift truck is the kind of equipment which is found in distribution centers and warehouses where space is at a premium. Narrow construction means that it can not lift as much as a typical lift truck model, however, it has an extendable mast which can easily carry loads roughly 40 feet.
Telescopic Forklift: The telescopic lift truck is also known as a telehandler, or a telescopic handler or sometimes even an extendable reach forklift. These equipment are more heavy duty and more rugged compared to the traditional forklift. These units offer a telescopic boom which is capable of being extended out and raised up. Normally, these units are utilized on rough terrain. They can handle loads up to 70 feet high and could move loads weighing over 30,000 pounds. handle loads up to 70 feet high
Straight Mast Forklift: The straight mast forklift is most usually used to perform tasks on rough terrain. These types of forklifts can only move loads vertically, not like a telescopic unit. These models could raise loads up to 12,000 pounds, while reaching a height of 10 to 30 feet.
|
|
