Most of the time, businesses would spend a lot of money to purchase their forklifts. It is vital, therefore to take good care of your machine to protect your investment into the long run. It is a great idea to know the procedures that are undertaken in the care and maintenance of this piece of machinery.
Amongst the best ways to tell how good the engine is running is by starting the forklift up and listening closely to see how it runs. For example, if there are any misses or knocks, the machinery is defective and this must raise several issues. Furthermore listen carefully for any squealing noise that come from the belts as these sounds will provide you with a lot of information.
Several of the main parts requiring attention during maintenance include the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty parts have to be replaced as soon as they are noticed. It is also essential to inspect the wiring.
The battery compartment terminals should be cleaned after the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them well. Every battery cell should be checked so as to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and after that change the filters. The fuel filters, hydraulic filter and the transmission filter need to be frequently replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
After the oil change is finished and the filters have been replaced, a visual inspection of the drive axle needs to be performed. If there is a grease fitting on the axle make certain to apply some grease. Check the engine belts for any frays or cracks. If you find any, fix the problem accordingly. Afterwards, inspect every other component of the machinery including the wheels. If any type of fault or concern is detected, be sure to deal with it immediately so as to make certain the equipment is running at its safest and optimum levels.