Propane Tank Rules
The LP or liquid petroleum system style gas container is an OSHA term that refers to the regulators, piping, hoses, regulators, valves and fittings. The agency needs specific components depending upon the tank's capacity. These individual parts must go trough standard laboratory testing. The correct laboratory approval shows that the system parts meet construction, pressure and thickness standards.
Tank Location
The organization OSHA determines how close the propane tank can be mounted in relation to ignitable materials, to buildings, to tanks which contain flammable liquids, cutting torches and welders. These stringent regulations are in place to make the jobsite really safe for the employees and those others who are nearby.
Nameplate Marks
LP systems require that the name, the address, the supplier of the container, and or the tanks brand name, be marked on the propane container. The container capacity is to be listed with the following details: gallons or pounds of fuel, square foot outside surface, fill level, and pressure. Furthermore, details regarding whether or not the container is designed for installation above ground or underground is also visible. These markings must be on a metal plate attached to the container somewhere in plain sight. OSHA requires that each and every tank must be marked by the National Board of Boiler and Pressure Vessel Inspectors in order to be considered safe and ready to use.
Tank Modifications and Repairs
OSHA also regulates any repairs to the LP systems, like welding. The workers performing repairs and the tank owners must know the regulatory codes and standards that the tanks were made. Welding repairs to any system part that is subject to internal pressure should first follow these fabrication codes. Any other kind of welding is only permitted on saddle plates, lugs or brackets.
The OSHA works hard to make certain that individuals who work with lift trucks and nearby are kept safe. They have strict regulations and training procedures in place in order to make certain that these industrial machinery and their repair processes are handled with respect and as safe as possible. It is very essential that businesses follow their rules and steep fines can happen if they are not adhered to.