Forklift Battery Safe Installation and Charging
Batteries used in forklifts are costly pieces of equipment which are pretty large weighing many pounds. The task of charging and installing these batteries is something which would need to be planned out ahead of time in order to make certain that these methods are able to be completed properly and safely. Maintaining a sound charging method and proper handling could majorly increase the battery's regular life span.
Standard Charging
It is vital not to connect the battery to the charger until it is at 20 percent capacity or lower. By charging the battery when it is higher than 20%, the lifespan of the battery could really be shortened. On around every 5th charge cycle, the charger needs to be set on the equalize or weekend setting, depending on which type of charger you are using.
The cycle of charging must not get interrupted. You should avoid utilizing the battery for some hours once the charge cycle is done. By practicing these procedures, you can help make sure that you get the maximum battery performance available.
Charger Maintenance
Make sure the charger is turned off prior to hooking up the battery to the charger. You then could connect the charger to the battery. This is a common error which can inadvertently cause damage to both the charger and the forklift. It is also really important that the battery amperage must match that of the charger.
Do not ever allow the battery to deep discharge or completely discharge. This will shorten the battery life significantly and may even prevent the charger from being able to activate. If the battery charger reads that there is no battery activity, it would not start the charge cycle. If this situation occurs, a technician must be called in order to re-set the charger prior to charge being able to start.